View 10700447_4775984.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Analog 8-wire PET-On-Glass Touch Screen Specification
1. Mechanical Dimensions and Construction 1.1 1.2 General: Analog Resistive touch screen is laminated by ITO PET to ITO glass. Construction : Item 1 2 3 4 5 6 7 8 9 10 11 12 13 Description ITO PET (Top layer) Material 0.188mm ITO PET Film Remarks Antiglare coating Surface hardness: 3H Resistance:300~600/ Resistance:300~600/ Separated Tail
ITO Patterned Glass (Bottom layer) 1.8mm chemical strengthened CS ITO Glass Tail Base Polymide Tail cover lay Polymide Conductor Copper Top layer circuit Silver ink Bottom layer circuit Silver ink Layer to layer contacted Silver ink Dot spacer UV Cure ink Isolation Layer Isolation Adhesive Stiffener PET Film Glue UV Glue Tape PET Film
Touch screen side view:
Changes that contribute to technical improvement are subject to alternations
2006 Bearb. Gepr. Vert.
Datum 18.08. 18.08.
Name Maurer Maurer
TOUCHSCREEN
12,1", 8-Wire
AMT-98431-B1 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
EDV-Datasheet
don't change manually
H
Zu And. Datum Name
1070.0447
Index: -
D 79346 Endingen
page 1 of 5
1.3 Input Method and Activation Force Input Method 1.6mm O Delrin stylus 16mm O Silicon "finger" Average Activation Force 0,1 ~ 0,7 N 0,1 ~ 0,8 N
2. Typical Optical Characteristics 2.1 2.2 Visible Light Transmission: Haze: > 80% < 13%
3. Electrical Specifications 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Operating Voltage: Contact current: Circuit close resistance: Circuit open resistance: Contact bounce: Linear Test : Capacitance: 5.5V or less 20mA (maximum) X : 400 -1000; Y : 250 -750 > 10M at 25VDC < 10ms < 1.5 % 100nF(maximum)
4. Linearity 4.1 Linear Test Specification Direction X: <1.5 % Direction Y: <1.5 % 4.2 Line Test Circuit for Y Coordinate Add 5V between Y1 and Y2 touch the point C0R0 to C9R9 separately, and measure the voltage from X1 as the following drawing.
Changes that contribute to technical improvement are subject to alternations
2006 Bearb. Gepr. Vert.
Datum 18.08. 18.08.
Name Maurer Maurer
TOUCHSCREEN
12,1", 8-Wire
AMT-98431-B1 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
EDV-Datasheet
don't change manually
H
Zu And. Datum Name
1070.0447
Index: -
D 79346 Endingen
page 2 of 5
4.3
Calculate Linearity : For the First Row0 R0avg = ( VC0 + VC1 + VC2 +- - - - - - - + VC9) / 10 R0max = The maximum voltage in Row 0 R0min = The minimum voltage in Row 0 R0 linear1 = R0 max - R0 avg. / R0 avg. 100% R0 linear2 = R0 min - R0 avg. / R0 avg. 100% R0 linear = max (R0 linear1, R0 linear2) For X Coordinate Test Add 5 voltage between X1 and X2 touch the point C0R0 to C9R9 separately and measure the voltage from Y1 as the above drawing Calculate Linearity : For the First Column0 C0avg = ( VR0 + VR1 + VR2 +- - - - - - - + VR9 ) / 10 C0max = The maximum voltage in Column 0 C0min = The minimum voltage in Column 0 C0 linear1 = C0 max - C0 avg. / C0 avg. 100% C0 linear2 = C0 min - C0 avg. / C0 avg. 100% C0 linear = max ( C0 linear1 ,C0 linear2 )
4.4
4.5
Changes that contribute to technical improvement are subject to alternations
2006 Bearb. Gepr. Vert.
Datum 18.08. 18.08.
Name Maurer Maurer
TOUCHSCREEN
12,1", 8-Wire
AMT-98431-B1 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
EDV-Datasheet
don't change manually
H
Zu And. Datum Name
1070.0447
Index: -
D 79346 Endingen
page 3 of 5
5. Environment Specification 5.1 5.2 Operating Temperature Storage Temperature - 5 C - + 55 C - 40 C - + 70 C Humidity less than 90% RH at Ambient Humidity
6. Reliability Test 6.1 Exposure to high temperature Touch panel is put into a test machine at the condition of 70C for 120 hours. Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6 Exposure to low temperature Touch panel is put into a test machine at the condition of -40C for 120 hours. Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6 Exposure to constant temperature and humidity Touch panel is put into a test machine at the condition of 55C, 95%RH for 120 hours. Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6 Thermal Shock Touch panel is put into a test machine at the condition of -40C for 30 minutes, and then 70C for 30 minutes. The process is repeated by 10 cycles. Then it is left at the room temperature for 24 hours or more. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
6.2
6.3
6.4
Changes that contribute to technical improvement are subject to alternations
2006 Bearb. Gepr. Vert.
Datum 18.08. 18.08.
Name Maurer Maurer
TOUCHSCREEN
12,1", 8-Wire
AMT-98431-B1 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
EDV-Datasheet
don't change manually
H
Zu And. Datum Name
1070.0447
Index: -
D 79346 Endingen
page 4 of 5
7. Durability test: 7.1 Finger touches Touch panel is hit 10 millions times with a silicone rubber of R8 finger, hitting rate is by 250g at 2 times per second. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6 7.2 Stylus writing Touch panel is drawn by R0.8 Derlin stylus pen, at 250g forces, repeat one inch by 100K times. The measurement must satisfy the following: - Circuit close resistance: as Sec. 3.3 - Circuit open resistance: as Sec. 3.4 - Contact bounce: as Sec. 3.5 - Linearity test: as Sec. 3.6
8. Optical Performance 8.1 8.2 8.3 Optical inspection method and optical defect standards refer to document. A001-2 Touch Screen Optical Quality Standard. Outside to Viewing Area : any optical defected in this area need to be ignored if no effected to touch screen function. Silver Bus Pattern defect : Voids in traces to be less than 50% of the trace width. 8.3.1 8.3.2 8.4 8.5 Silver Bus Pattern gap: >0.1mm Silver Bus and Active area gap: No silver ink may project beyond the viewing area.
Glass defects such as edge chips and scratches refer to A001-2, Touch Screen Optical Quality Standard. Others Always store the touch screen in its original shipping container under normal conditions (20~25C, 65% RH)
Changes that contribute to technical improvement are subject to alternations
2006 Bearb. Gepr. Vert.
Datum 18.08. 18.08.
Name Maurer Maurer
TOUCHSCREEN
12,1", 8-Wire
AMT-98431-B1 SPECIFICATIONS OF ANALOG RESISTIVE PET-ON-GLASS TOUCH SCREEN
Manufactured by Apex Material Technology Corp.
EDV-Datasheet
don't change manually
H
Zu And. Datum Name
1070.0447
Index: -
D 79346 Endingen
page 5 of 5

▲Up To Search▲

Price & Availability of 10700447

	To Download 10700447 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .